+34 941 30 60 70
|43-03||Aluminium tube 43||120 ml|
|43-07-01||Kit chain 43 white||50|
|43-07+colour||Kit chain 43 colour||50|
To obtain a major force the spring can be charged dismantling the arm of the bracket and rotating in the opposite direction to the fall of the fabric with 5 or 6 turns. The Spring should be installed in the opposite side of the kit and it will be right or left handed having always the roller blind in a front view and the fall of the fabric behind the tube. If the fall of the fabric is in front of the tube we will install an opposite spring to its side.
The compensation spring should give a maximum of 25 turns. We have to charge the compensation spring with 3 turns for every Kg. supported.
Depending on the fabric we will obtain heights from 4 to 4,5 lm with a tube of 43 m/m
|43-05||Spring for tube 43||50|
With the intermediate bracket transmisor, we can install a group of blinds with one single control. We can also install a compensation spring in the last blind to make easy the roll up.
|43-06+colour||Intermediate bracket transmisor||50|
The geared down drive system can be used in 43 tube or 58 tube, It will depends on the adapters that we use.
The ratio is, from 1,75 to 1
If it was necessary, it can install with compensation spring. Available in 28 colours
|43-58||Geared down drive||50|
|43S-03||Set of brackets for 43||50|
|43S-08||Adapter for brackets and tube of 43||50|
|43-13||End less chain||50|
+34 941 30 60 70 · firstname.lastname@example.org